This is an old revision of the document!
Helpful Links
NATO - Allied Quality Assurance Publications (AQAPs)
Glossaries
14 CFR (Chapter I - Federal Aviation Administration) § 5.5 - Definitions
14 CFR (Chapter III - Commercial Space Transportation) § 401.5 - Definitions
ASME B1.7-2006 "Screw Threads: Nomenclature, Definitions, and Letter Symbols"
Defense Acquisition University (DAU) "Glossary of Defense Acquisition Acronyms and Terms"
ISACA (Information Systems Audit and Control Association) - Glossary
International Electrotechnical Commission Glossary
ISO Online Browsing Platform "Terms & Definitions"
Glossary – Guidance on selected words used in the ISO 9000 family of standards (PDF)
NIST Engineering Statistics Handbook - Glossary
General Quality Tools & Templates
Unilaterial & Bilateral Cp - Cpk Calculator (Excel template): from Lean Flow Consulting
Process Flowcharting
"Business Process Model and Notation" (BPMN™) Standard
Flowcharting Symbology / Conventions (Based upon ISO 5807:1985)
Note 1: While still valid, ISO 5807:1985 is extremely antiquated. Preference should be given to using the “Business Process Model and Notation” (BPMN™) standard for flowcharting your processes.
Note 2: The suite of BPMN symbols is included in all major flowcharting software programs (e.g., EDraw, Visio with BPMN). Also, everal free and/or inexpensive online Flowcharting applications are available, such as:
Process Sigma Calculator
Process Sigma Calculator (from iSix Sigma)
Process Sigma Calculator (from EasyCalculation.com)
DPMO Calculator (from EasyCalculation.com)
DPPM Calculator (from EasyCalculation.com)
Business Continuity Planning (BCP)
The “best” industry standard for BCP is:
NFPA 1600, “Standard on Continuity, Emergency, and Crisis Management” (2019 Edition)
https://www.nfpa.org/codes-and-standards/all-codes-and-standards/list-of-codes-and-standards/detail?code=1600
While NFPA 1600 has been influenced by ISO for many years, it still remains superior to ISO 22301 in many ways (see below).
Although a government standard, another very good standard is:
NIST Special Publication 800-34 Rev. 1, “Contingency Planning Guide for Federal Information Systems”
https://nvlpubs.nist.gov/nistpubs/Legacy/SP/nistspecialpublication800-34r1.pdf
While ISO has produced ISO 22301, “Societal security — Business continuity management systems — Requirements”, once you dig through all of the required Annex L nonsense.. and the laughable incompetence of the authors, there are only a few gems buried in it. Similarly, ANSI/ASIS ORM.1-2017, “Security And Resilience In Organizations And Their Supply Chains - Requirements With Guidance” addresses this topic as well (although the ASIS_SPC.1-2009 version was better in some regards). However, it is too similar to ISO 22301 to be of any real value.
Ultimately, any company would be FAR better off simply purchasing a copy of “Business Continuity For Dummies” (which is actually quite good) than either of these two standards.
You may note that NFPA 1600, “Standard on Continuity, Emergency, and Crisis Management” (2019 Edition), Annex E, integrates the requirements of NFPA 1600 with ISO Annex SL. This was done to promote integration with existing ISO Management System Standards… and is “intended to be adopted by the entity at its discretion”. Ultimately, this simply aligns common topics such as document control, corrective action, etc.
Sources for Standards
All rights reserved. 
Copyright © 2015-2024 by RRBG, Inc.