Richard C. Randall

nist_traceability - [An "unbroken chain of calibrations" to what?]

rrandall (rrandall@undisclosed.example.com) — 2025-11-18T20:33:54+00:00

NIST Traceability Numbers - The Sasquatch of Metrology Every so often, I'll hear of an experienced Quality Management System (QMS) Auditor insisting that the only way to prove calibration (metrological) traceability is through the inclusion of NIST Traceability/Test numbers on a calibration certificate.

as_910xx_links - [AS9100 & Aerospace Related Links]

rrandall (rrandall@undisclosed.example.com) — 2025-11-12T18:28:41+00:00

AS9100 & Aerospace Related Links Online Aerospace Supplier Information System (OASIS) V3 International Aerospace Quality Group (IAQG) Contact info. for AS Standard IDRs (IAQG Document Representatives) & SDRs (Sector Document Representatives) IAQG "Official" AS 9100:2016 Series Clarifications (2nd section of the linked page) IAQG Supply Chain Management Handbook (SCMH) SAE forms for AS9101G & F, AS9102 (FAIRs), 9104-002, 9145 (PPAP Approval) AESQ™ Supplementary Materials (e.g., 8D templa…

start - [QMS Support Services]

rrandall (rrandall@undisclosed.example.com) — 2025-11-12T18:23:48+00:00

QMS Support Services We provide businesses with part-time, contracted ISO 9001, AS9100, AS9120, ISO 13485, ISO 17020, ISO 17025 and IATF 16949 Quality Certification Specialists Whether you're seeking certification, OR already certified and seeking a way to consolidate your resources, we can support you.

optimizing_calibration_intervals - [Methodologies for the Determination of Calibration Intervals]

rrandall (rrandall@undisclosed.example.com) — 2025-10-31T16:39:56+00:00

Reducing Waste: Through Optimizing Calibration Intervals One of the most often overlooked areas in Lean Six Sigma for reducing waste is the optimization of calibration (i.e., metrological confirmation) intervals. Why should you care about optimizing calibration intervals?

soot - [What does this mean?]

rrandall (rrandall@undisclosed.example.com) — 2025-07-26T21:48:12+00:00

"Significantly-Out-Of-Tolerance" (SOOT) Conditions While you may have never heard this term before, you may encounter it IF you're a supplier to Collins Aerospace OR Pratt & Whitney. The Collins "AEROSPACE SUPPLIER QUALITY REQUIREMENTS" (ASQR-01, Rev. 15), includes the following section: 7.1.5.1.2.1.1 Monitoring and Measuring Resources - General Significant-Out-Of-Tolerance (SOOT) condition is defined as Measuring and Test Equipment (M&TE) out-of-tolerance condition that either (a) exceeds…

smart_tasks_form_11-24.docx - created

rrandall (rrandall@undisclosed.example.com) — 2024-11-23T23:58:33+00:00

smart_tasks_-_template_10-01-21_screen_shot.png - removed

rrandall (rrandall@undisclosed.example.com) — 2024-11-23T23:58:07+00:00

smart_tasks_form_11-24.pdf - removed

rrandall (rrandall@undisclosed.example.com) — 2024-11-23T23:57:47+00:00

smart_tasks_form_11-24.png - created

rrandall (rrandall@undisclosed.example.com) — 2024-11-23T23:54:35+00:00

competency_matrix-template_rev._11-23-24_.xlsx - created

rrandall (rrandall@undisclosed.example.com) — 2024-11-23T21:38:23+00:00

competency_matrix-template_rev._05-08-23_.xlsx - removed

rrandall (rrandall@undisclosed.example.com) — 2024-11-23T21:33:45+00:00

competency_matrix-template_rev._11-14-23_.xlsx - removed

rrandall (rrandall@undisclosed.example.com) — 2024-11-23T21:33:37+00:00

iso9001_2015_listing-of-approved_interpretations_rfi-133-140_.pdf - created

rrandall (rrandall@undisclosed.example.com) — 2024-08-04T19:29:14+00:00

iso9001_2015_listing-of-approved_interpretations_rf-133-140_.pdf - removed

rrandall (rrandall@undisclosed.example.com) — 2024-08-04T19:29:03+00:00

iso9001-2008_listing_of_approved_interpretations_rfi-104-132_.pdf - created

rrandall (rrandall@undisclosed.example.com) — 2024-08-04T19:24:47+00:00

8_forms_of_waste.png - created

rrandall (rrandall@undisclosed.example.com) — 2024-08-01T15:35:43+00:00

unilateral_cp-cpk_calculator_02-07-23_w-trend_lines.xlsx

rrandall (rrandall@undisclosed.example.com) — 2024-01-24T16:34:06+00:00