Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revision
Previous revision
Next revisionBoth sides next revision
articles:nist_traceability [2019/01/26 14:45] – [An "unbroken chain of calibrations" to what?] rrandallarticles:nist_traceability [2019/06/12 22:32] – [Conclusion] rrandall
Line 41: Line 41:
 a. calibrated or verified, or both, at specified intervals, or prior to use, against measurement standards __traceable to international or national measurement standards; when no such standards exist, the basis used for calibration or verification shall be retained as documented information__;//" a. calibrated or verified, or both, at specified intervals, or prior to use, against measurement standards __traceable to international or national measurement standards; when no such standards exist, the basis used for calibration or verification shall be retained as documented information__;//"
 </WRAP> </WRAP>
-Unfortunately, the language in ISO 9001:2015 & AS9100:2016 (Rev. D) is extremely antiquated (by about 55 years) in stating its requirements for "measurement traceability". In contrast, ISO 17025:2017 is much more modern and technically correct in stating:\\+Unfortunately, the language in ISO 9001:2015 & AS9100:2016 (Rev. D) is extremely antiquated in stating its requirements for "measurement traceability". In contrast, ISO 17025:2017 is much more modern and technically correct in stating:\\
 <WRAP center round box 80%> <WRAP center round box 80%>
 **ISO 17025:2017, “General requirements for the competence of testing and calibration laboratories”** \\ **ISO 17025:2017, “General requirements for the competence of testing and calibration laboratories”** \\
Line 66: Line 66:
 ===== What are SI Units? ===== ===== What are SI Units? =====
 {{ :articles:2018-si.png?direct&130|}} {{ :articles:2018-si.png?direct&130|}}
-Adopted by the [[https://en.wikipedia.org/wiki/General_Conference_on_Weights_and_Measures|General Conference on Weights and Measures (CGPM)]] in 1960, the "[[https://www.bipm.org/en/measurement-units/|International System of Units]]" (//Système International d'Unités//, with the international abbreviation SI) consists of 7 base units that define 22 derived units. With the exception of the kilogram, the base SI units are all derived from intrinsic (i.e., invariant) constants of nature, such as the speed of light in vacuum and the [[https://en.wikipedia.org/wiki/Boltzmann_constant|Boltzmann constant]] (which serves as the basis for the Kelvin temperature scale). According to Dr. Chris Sutton, "[[https://www.sciencelearn.org.nz/resources/1872-non-si-units|the SI system of units allows for complete coverage of all scientific measurements]]". \\+Adopted by the [[https://en.wikipedia.org/wiki/General_Conference_on_Weights_and_Measures|General Conference on Weights and Measures (CGPM)]] in 1960, the "[[https://www.bipm.org/en/measurement-units/|International System of Units]]" (//Système International d'Unités//, with the international abbreviation SI) consists of 7 base units that define 22 derived units. The base SI units are all derived from intrinsic (i.e., invariant) constants of nature, such as the speed of light in vacuum and the [[https://en.wikipedia.org/wiki/Boltzmann_constant|Boltzmann constant]] (which serves as the basis for the Kelvin temperature scale). According to Dr. Chris Sutton, "[[https://www.sciencelearn.org.nz/resources/1872-non-si-units|the SI system of units allows for complete coverage of all scientific measurements]]". \\
  
 The SI Units are defined in the [[https://www.bipm.org/en/publications/si-brochure/|SI Brochure]], which is published by the [[https://www.bipm.org/en/about-us/|“Bureau International des Poids et Mesures” (BIPM)]], located in France. The SI Units are defined in the [[https://www.bipm.org/en/publications/si-brochure/|SI Brochure]], which is published by the [[https://www.bipm.org/en/about-us/|“Bureau International des Poids et Mesures” (BIPM)]], located in France.
- 
-SI Units are also explained on the NIST web site at: https://www.nist.gov/pml/weights-and-measures/metric-si/si-units 
  
 Because SI units are derived from intrinsic (i.e., invariant) constants of nature, "intrinsic measurement standards" exist. This is acknowledged in ISO 17025:2017, sec. 6.5.2, which provides 3 (three) different methodologies for achieving metrological traceability. And is further clarified in ISO 17025:2017, "Annex A: Metrological traceability". \\ Because SI units are derived from intrinsic (i.e., invariant) constants of nature, "intrinsic measurement standards" exist. This is acknowledged in ISO 17025:2017, sec. 6.5.2, which provides 3 (three) different methodologies for achieving metrological traceability. And is further clarified in ISO 17025:2017, "Annex A: Metrological traceability". \\
Line 80: Line 78:
 b) a documented unbroken chain of calibrations going back to stated and appropriate references (appropriate references include national or international standards, and __intrinsic standards__);//  b) a documented unbroken chain of calibrations going back to stated and appropriate references (appropriate references include national or international standards, and __intrinsic standards__);// 
 </WRAP> </WRAP>
 +
 +SI Units are also explained on the NIST web site at: https://www.nist.gov/pml/weights-and-measures/metric-si/si-units and in "[[https://www.nist.gov/pml/special-publication-330|NIST Special Publication 330 -  The International System of Units (SI)]]". Both NIST sources will likely be updated soon to reflect the new definitions to the SI that went into effect on May 20, 2019. 
 ===== What are "intrinsic" standards? ===== ===== What are "intrinsic" standards? =====
  
Line 113: Line 113:
 While ISO 9001:2015, AS9100:2016 (Rev. D) and ISO 17025:2017 all mention "International Standards", I am aware of only four (4) "international standards" (as opposed to SI //units//); three of which are listed as examples in the "Bureau International des Poids et Mesures" (BIPM) [[https://www.bipm.org/utils/common/documents/jcgm/JCGM_200_2012.pdf|JCGM 200:2012, "International vocabulary of metrology – Basic and general concepts and associated terms (VIM)"]] (3rd edition), sec. 5.2, "international measurement standard". However, there are probably others. Those that I am aware of include: \\ While ISO 9001:2015, AS9100:2016 (Rev. D) and ISO 17025:2017 all mention "International Standards", I am aware of only four (4) "international standards" (as opposed to SI //units//); three of which are listed as examples in the "Bureau International des Poids et Mesures" (BIPM) [[https://www.bipm.org/utils/common/documents/jcgm/JCGM_200_2012.pdf|JCGM 200:2012, "International vocabulary of metrology – Basic and general concepts and associated terms (VIM)"]] (3rd edition), sec. 5.2, "international measurement standard". However, there are probably others. Those that I am aware of include: \\
 \\ \\
-**1 - The international prototype of the kilogram** \\+**1 - The international prototype of the kilogram (OBSOLETE as of May 20, 2019)** \\
 All of the SI units are based on physical constants of nature EXCEPT the kilogram. The kilogram is the unit of mass; which nominally has the same mass as one litre of water at the freezing point.  All of the SI units are based on physical constants of nature EXCEPT the kilogram. The kilogram is the unit of mass; which nominally has the same mass as one litre of water at the freezing point. 
 The only SI unit "physical artifact" (i.e., not defined by a fundamental, natural constant), the international prototype kilogram (IPK), was certified in 1889, and consists of a cylinder of platinum-iridium. The IPK is maintained by the [[https://www.bipm.org/en/publications/si-brochure/kilogram.html|BIPM]]. The only SI unit "physical artifact" (i.e., not defined by a fundamental, natural constant), the international prototype kilogram (IPK), was certified in 1889, and consists of a cylinder of platinum-iridium. The IPK is maintained by the [[https://www.bipm.org/en/publications/si-brochure/kilogram.html|BIPM]].
  
-<note>Because the IPKs stability has been a matter of significant concern, during November 2018, the world’s measurement experts voted and unanimously approved a revision of the SI that establishes a measurement system entirely based on physical constants of nature. The changes will take effect on [[http://www.worldmetrologyday.org|World Metrology Day]], May 20, 2019. See [[https://www.theverge.com/2018/11/13/18087002/kilogram-new-definition-kg-metric-unit-ipk-measurement|The Kilogram is Dead; Long Live the Kilogram]]</note>+<note>Because the IPKs stability has been a matter of significant concern, during November 2018, the world’s measurement experts voted and unanimously approved a revision of the SI that establishes a measurement system entirely based on physical constants of nature. The changes took effect on [[http://www.worldmetrologyday.org|World Metrology Day]], May 20, 2019; which  commemorates the anniversary of the signing of the Metre Convention in 1875. See [[https://www.theverge.com/2018/11/13/18087002/kilogram-new-definition-kg-metric-unit-ipk-measurement|The Kilogram is Dead; Long Live the Kilogram]]</note>
 **2 - Chorionic Gonadotrophin (Biological standard)** \\ **2 - Chorionic Gonadotrophin (Biological standard)** \\
 Defined by the [[http://apps.who.int/iris/bitstream/handle/10665/70154/WHO_BS_09.2107_eng.pdf|World Health Organization (WHO)]] in the 4th international standard 1999, as 75/589, 650 International Units per ampoule. Defined by the [[http://apps.who.int/iris/bitstream/handle/10665/70154/WHO_BS_09.2107_eng.pdf|World Health Organization (WHO)]] in the 4th international standard 1999, as 75/589, 650 International Units per ampoule.
Line 135: Line 135:
 </WRAP> </WRAP>
  
-Unless required by statute or regulation (i.e., for Legal Metrology), mandating "NIST traceability" unnecessarily "limits" the sources for metrological traceability, excluding other NMIs and/or accredited commercial metrology laboratories.+Unless required by statute or regulation (i.e., for [[https://www.oiml.org/en/about/legal-metrology|Legal Metrology]]), mandating "NIST traceability" unnecessarily "limits" the sources for metrological traceability, excluding other NMIs and/or accredited commercial metrology laboratories.